Troubleshooting; Repair And Rebuild - prime mover smx45 Master Service Manual

F-code Section
PT S0.1
Frame
Version no T-code
001 SMX
76
Return
C-code
0300
5. All bushings are to be replaced with new.

3. Troubleshooting

Inspect carrier frame and lift frame for crack formation and
damage.

4. Repair and Rebuild

NOTE!
NOTE!
Extensive damage to carrier frame, lift frame, or truck in any
weldment must be reported to BT Prime-Mover, Inc. Do not
attempt to weld the frame without permission from BT Prime-
Mover.
Master Service Manual
CLEANLINESS! Perform procedures in a
clean environment. Make sure all parts are
cleaned before disassembly and kept clean
during assembly.
Call-outs in the following procedure refers
to illustration on page 78.
2006-08-03