Functions/Operations; Battery; Battery Connector - prime mover smx45 Master Service Manual

F-code Section
PT P2.0
Service Schedule
Version no T-code
001 SMX
66
Return
C-code

2.2.5. Functions/Operations

Test truck for the proper operation of all functions including
the speed and thumb controls (arm angle switches), lift and
lower functions, brakes, steering, reverser button, horn button
and the main ON/OFF switch. Devices must be operational.
Report any problems to the proper authorities. DO NOT
operate the truck until it has been inspected and repaired by a
trained, qualified, and authorized technician.

2.2.6. Battery

Contact your battery supplier for specific instructions on
care and maintenance of the battery. Determine if the
battery needs to be washed down. This can only be done by
a trained, qualified, and authorized technician.
An average battery will have a specific gravity of 1.170 at the
80 percent discharged level. However, there are many
different batteries on the market. The battery supplier can
accurately determine the fully charged and 80 percent
charged levels. Contact an authorized battery supplier to
determine the overall condition of the battery.
The Battery Discharge Indicator (BDI) indicates the current
state of charge of the truck's battery.
on page 178.)
1
1/2
0
When the battery has reached a charge level equivalent to 70
percent discharge, a warning signal is given via flashing
lights. A further 10 percent of the battery's capacity can then
be used before the battery discharge cuts out the lift function.

2.2.7. Battery Connector

Inspect the negative and positive cables for breaks and wear.
Check connectors for damage and to ensure proper
connections of cables.
Master Service Manual
Full charge battery
Half charged battery
Discharged battery
(See "Parameter 21"
2006-08-03