prime mover smx45 Master Service Manual page 109

© BT Prime-Mover, Inc.
Return
8. Ensure drive unit contains the correct gear oil level
(see page
9. With the truck still blocked and drive unit off the
ground, connect the truck to a battery. (Do not
install battery on the truck at this time.)
10. Test ease of steering. Test to make sure truck
powers ON and all functions on the handle head
are functional. Move handle up and down to test
arm angle switches.
11. Disconnect battery.
12. Install drive wheel (see
13. Unblock and lower truck.
14. Install the battery on the truck. If applicable, secure
battery bolts to the truck.
15. Install truck cover(s) [see
16. Connect the battery connector to the truck.
17. Turn the main ON/OFF switch to the ON position.
Enter key code and press the green ON button "I"
on the keypad.
Master Service Manual 2006-08-04
F-code Section
PT S2.0
Version no T-code
001 SMX
72.) Install fill/level plug.
page 118.)
page 84.]
C-code
2550
Transmission
107