prime mover smx45 Master Service Manual page 240

F-code Section
PT S5.6
Contactor Panel
Version no T-code
000 SMX
238
Return
C-code
5436
4. Remove screws (15) securing the bus bar (17) and
cables to the contactor (3), noting the location for
assembly later.
5. Remove screws (2) holding the contactor (3)
assembly to the electrical panel (4).
Installation
1. Secure contactor (3) to the electrical panel (4) with
screws (2).
2. Secure bus bar (17) and cable to the contactor (3)
with screws (15).
3. Connect the wires to the X and Y terminals.
4. Connect the battery connector to the truck.
5. Turn main ON/OFF switch to the ON position.
Enter key code and press the green ON button "I"
on the keypad.
6. Test truck for proper operation before returning to
service.
7. Install truck cover(s).
Master Service Manual 2004-03-10