Troubleshooting; Repair And Rebuild - prime mover smx45 Master Service Manual

F-code Section
PT S2.0
Transmission
Version no T-code
001 SMX
100
Return
C-code
2550
6. Fill transmission case with oil (see
through plug opening in transmission cover.

3. Troubleshooting

Because of the uncomplicated nature of the transmission,
troubleshooting is limited to identifying problems if they are
mechanical or electrical in nature. Fluid leaks are obviously
mechanical in nature and can be found by visual inspection.
Unusual noise and/or slow running could be mechanical or
electrical in nature. Generally, if the problem is caused
internally in the transmission, then metal contamination will
be evident in the oil. If there is a mechanical problem outside
of the transmission, then it will become evident by inspecting
the drive motor and brakes. See
release the brake, if necessary.

4. Repair and Rebuild

Visually inspect outside of gear case for damage, wear or
cracks. Excessive damage, wear, or cracks in the gear case
indicate that the transmission needs to be replaced rather
than repaired or rebuilt.
Master Service Manual
page
page 111 for instructions to
2006-08-04
72)