wsm L503 Workshop Manual page 2

This Workshop Manual has been prepared to provide servicing personnel with
information on the mechanism, service and maintenance of KUBOTA Tractor L3130,
L3430, L3830, L4630 and L5030.
"Servicing" for each section.
Mechanism
Information on the construction and function are included. This part should be
understood before proceeding with troubleshooting, disassembling and servicing.
Refer to Diesel engine / Tractor Mechanism Workshop Manual (Code No. 97897-
01872 / 97897-18200) for the one which has not been described to this workshop
manual.
Servicing
The heading "General" includes general precautions, check and maintenance and
special tools. Other section, there are troubleshooting, servicing specification lists,
checking and adjusting, disassembling and assembling, and servicing which cover
procedures, precautions, factory specifications and allowable limits.
All information illustrations and specifications contained in this manual are based on
the latest product information available at the time of publication.
The right is reserved to make changes in all information at any time without notice.
© KUBOTA Corporation 2003
TO THE READER
It is divided into two parts, "Mechanism" and
November 2003
KiSC issued 02, 2007 A