Automatic Dv Detection - Icom ID-52A Advanced Manual

5
D-STAR OPERATION (ADVANCED)

Automatic DV detection

If you receive an FM signal while in the DV mode, the
"DV" and "FM" icons alternately blink to indicate the
received signal is FM�
When the DV Auto Detect function is ON, the
transceiver automatically selects the FM mode to
monitor it temporarily� (Default: OFF)
L Regardless of this setting, the "DV" and "FM" icons
alternately blink if you receive an FM signal while in the
DV mode�
NOTE: When Digital Call Sign squelch (DSQL),
or Digital Code squelch (CSQL) is selected, the
transceiver does not receive FM signals, even if this
function is ON� You can silently wait for calls from
others�
When an FM signal is received while in the DV mode
DV Auto Detect function: OFF
The "DV" and "FM" icons alternately blink, but the
audio cannot be heard�
The icons
alternately blink�
● ● ●
You cannot hear
the audio�
5-23
[MENU] > SET > DV Set > DV Auto Detect
1� Push [MENU]�
2� Select "DV Set" in the "SET" menu�
3� Select "DV Auto Detect�"
4� Select "ON�"
L To exit the MENU screen, push [MENU]�
L When an FM signal is received while in the DV mode,
the "DV" and "FM" icons sequentially blink, and the
transceiver receives the signal in the FM mode�
DV Auto Detect function: ON
The "DV" and "FM" icons alternately blink, and the
audio can be heard�
The icons
alternately blink�
Thanks for
the nice QSO!
You can hear the
audio!