Automatic Dv Detection - Icom IC-705 Advanced Manual

14. D-STAR OPERATION (ADVANCED)

Automatic DV detection

If you receive an FM signal while in the DV
mode, the "DV" and "FM" icons alternately blink
to indicate the received signal is FM.
When the DV Auto Detect function is ON, the
transceiver automatically selects the FM mode to
temporarily monitor the signal. (Default: OFF)
LRegardless of this setting, the "DV" and "FM" icons
alternately blink if you receive an FM signal while in
the DV mode.
NOTE: When Digital Call Sign squelch (DSQL)
or Digital Code squelch (CSQL) is selected, the
transceiver does not receive FM signals, even
if this function is ON. You can silently wait for
calls from others.
When an FM signal is received while in the DV mode
DV Auto Detect function: OFF
The "DV" and "FM" icons alternately blink, but the
audio cannot be heard.
The icons
alternately blink.
...
You cannot hear
the audio.
14-16
1. Open the "DV Auto Detect" screen.
» SET > DV SET > DV Auto Detect
2. Touch "ON."
3. To close the DV SET screen, push
several times.
LWhen an FM signal is received while in the DV
mode, the "DV" and "FM" icons sequentially
blink, and the transceiver receives the signal in
the FM mode.
DV Auto Detect function: ON
The "DV" and "FM" icons alternately blink, and
the audio can be heard.
The icons
alternately blink.
Thanks for
the nice QSO!
You can hear
the audio!