Gps Alarm Setting - Icom IC-92A Instruction Manual

8
GPS/GPS-A OPERATION (Optional UT-121 is required for IC-92A)
r Rotate [DIAL]
†
to select desired items (NAME, TIME,
LATITUDE, LONGITUDE, BANK or BANK NAME), then
push [ ](6) to edit the selected item.
t Rotate [DIAL]
†
to select the desired character or symbol.
y Push [ ](6) to select 2nd digit, then rotate [DIAL]
lect the desired character or code.
• Push [ ](6) to move the cursor right; push [ ](4) to move the
➪
❮MENU screen❯ ❮MESSAGE/POSITION❯
(Push [MENU/ ]) (Rotate [DIAL]
cursor left.
GPS MEMORY GPS MEMORY
r RX
ALL
A:
:SET :SEL
:BACK :EDIT :EDIT
C :ALM
• 2nd digit blinks (1st digit stops blinking).
u Repeat the steps r and t to enter the desired message.
• Up to 20-character messages can be set.
i Push [ ](5) to add the GPS data.
o Push [MENU/
64
➪
❮GPS MEMORY❯
†
, then push [ ](5)
] to return to frequency indication.
D GPS alarm setting
GPS alarm sounds when your own position is close the
†
to se-
†
.)
specified area. This function can be set the received chan-
BANK A
<ADDITION> <ADDITION>
01:BAY-ARE 01:BAY
r
02:KOBE-AIR 02:KOBE
:SET :SET
:BACK :BACK
nel, specifi ed GPS memory channel, all GPS memory chan-
nels or a memory bank.
q Enter "GPS MEMORY" in message/position set mode.
• GPS MEMORY screen is displayed.
w Rotate [DIAL]
memory channel.
• "RX", "ALL", one of the memory bank or memory channel can
be selected.
• Skip e and operate r when alarm RX, ALL, BANK A–Z set.
BANK A
<ADDITION> <ADDITION>
01:BAY-AREA AREA
r
02:KOBE-AIR
:SET :SEL :SEL
:BACK :BACK :EDIT :EDIT
C :ALM :ALM
Alarm mark
Appearing at 8-digits
:SEL :SEL
of memory name.
:EDIT :EDIT
C :ALM :ALM
†
to select the desired memory bank or