Repeater Group Name Programming - Icom ID-31A Advanced Instructions

Previous view

■ Repeater group name programming

Push [MENU]
q
Push D-pad( ) to select the root item ("DV Memo-
w

ry"), and then push D-pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "Repeater List," and then
e

push D-pad(Ent).
Push D-pad( ) to select the repeater group you
r 
want to program the name.
Push .
t
Push D-pad( ) to select "Edit Name," and then push
y 
D-pad(Ent) to enter the group name edit mode.
Rotate [DIAL] to select a desired character.
u
• The selected character blinks.
• Push D-pad() to move the cursor right or left.
• While selecting a character, push
character to a upper case or lower case letter.
• While selecting a digit, push
selection window.
• A space can be selected, even for any input mode se-
lected.
• Push [CLR]
down [CLR]
after the cursor.
• See page 4-2 for programming details.
Push D-pad( ") to move the cursor to the second
i
digit.
Repeat steps u and i to enter a name of up to 16
o
characters, including spaces.
!0 After entering, push D-pad(Ent).
.
to change the
to open the input mode
to erase the selected character, or hold
to continuously erase the characters
4-33
DR MODE <ADVANCED>
Group name
edit mode
Character type
selection screen
Example:
"ASIA" is programmed.
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21