Resetting Bgp Connections; Displaying Information About Ipv6 Mce - HP MSR2000 series Configuration Manual

Step
2. Enter BGP view.
3. Enter IPv6 BGP-VPN
instance view.
4. Configure the PE as the
EBGP peer.
5. Redistribute the VPN
routes.
6. Configure a filtering
policy to filter the routes
to be advertised.
7. Configure a filtering
policy to filter the
received routes.
NOTE:
IPv6 BGP runs within a VPN in the same way as it runs within a public network. For more information
about IPv6 BGP, see

Resetting BGP connections

When BGP configuration changes, you can use the soft reset function or reset BGP connections to make
new configurations take effect. Soft reset requires that BGP peers have route refreshment capability
(supporting Route-Refresh messages).
Use the following commands to hard reset or soft reset BGP connections:
Step
1. Soft reset the IPv6 BGP
connections in a VPN
instance.
2. Hard reset the IPv6 BGP
connections of a VPN
instance.

Displaying information about IPv6 MCE

Task
Display information about a
specific or all VPN instances.
Command
bgp as-number
ipv6-family vpn-instance vpn-instance-name
peer ipv6-address as-number as-number
import-route protocol [ process-id [ med
med-value | route-policy
route-policy-name ] * ]
filter-policy { acl6-number | ipv6-prefix
ip-prefix-name } export [ direct | isisv6
process-id | ripng process-id | static ]
filter-policy { acl6-number | ipv6-prefix
ip-prefix-name } import
Layer 3—IP Routing Configuration Guide
Command
refresh bgp ipv6 vpn-instance
vpn-instance-name { ipv6-address
| all | external } { export | import }
reset bgp ipv6 vpn-instance
vpn-instance-name { as-number |
ipv6-address | all | external }
Command
display ip vpn-instance [ instance-name
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
.
427
Remarks
N/A
N/A
N/A
By default, No route
redistribution is configured.
Optional.
By default, BGP does not filter
the routes to be advertised.
Optional.
By default, BGP does not filter
the received routes.
Remarks
Available in user view
Available in user view
Remarks
Available in any view