Powering On The Router; Displaying Boot Information - HP FlexNetwork MSR3064 Installation Manual

•
The power source voltage meets the requirement of the router.
•
The console cable is properly connected, the terminal or PC used for configuration has started,
and the configuration parameters have been set.
•
If a CF card is used, verify that the CF card is in position.
•
Make sure the installed HMIMs/MIMs are in position.

Powering on the router

Turn on the switch of the power supply system for the router.
1.
Turn on the switch of the AC or DC power supplies.
2.

Displaying boot information

Power on the router, and you can see the following information:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare........
The Extended BootWare is self-decompressing....Done.
****************************************************************************
*
*
*
****************************************************************************
Copyright (c) 2010-2015 Hewlett Packard Enterprise Development LP
Compiled Date
CPU ID
Memory Type
Memory Size
BootWare Size
Flash Size
cfa0 Size
CPLD Version
PCB Version
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file cfa0:/msr3000-cmw710-system-e000603.bin........................
...............................Done.
Loading file cfa0:/msr3000-cmw710-security-e000603.bin.........Done.
Loading file cfa0:/msr3000-cmw710-voice-e000603.bin...........Done.
Loading file cfa0:/msr3000-cmw710-data-e000603.bin............Done.
Loading file cfa0:/msr3000-cmw710-boot-e000603.bin.......................
Done.
HPE MSR3064 BootWare, Version 1.60
: Dec 17 2015
: 0x4
: DDR3 SDRAM
: 2048MB
: 1024KB
: 8MB
: 247MB
: 2.0
: 2.0
37
*
*
*