Command Manual - System Management
Quidway S3500 Series Ethernet Switches
By default, there is no limit to the access.
Set authority to access the NTP services on a local Ethernet Switch. This is a basic and
brief security measure, compared to authentication. An access request will be matched
with peer, server, server only, and query only in an ascending order of the limitation.
The first matched authority will be given.
Example
# Give the authority of time request, query control and synchronization with the local
equipment to the peer in ACL 2076.
[Quidway] ntp-service access peer 2076
# Give the authority of time request and query control of the local equipment to the peer
in ACL 2028.
[Quidway] ntp-service access synchronization 2028
7.1.6 ntp-service authentication enable
Syntax
ntp-service authentication enable
undo ntp-service authentication enable
View
System view
Parameter
None
Description
Using ntp-service authentication enable command, you can enable the NTP-service
authentication function. Using undo ntp-service authentication enable command,
you can disable this function.
By default, the authentication is disabled.
Example
# Enable NTP authentication function.
[Quidway] ntp-service authentication enable
7.1.7 ntp-service authentication-keyid
Syntax
ntp-service authentication-keyid number authentication-mode md5 value
Huawei Technologies Proprietary
7-5
Chapter 7 NTP Configuration Commands