Header - Huawei quidway s3526 series Getting Started

Command Manual - Getting Started
Quidway S3500 Series Ethernet Switches
Description
Using free user-interface command, you can clear a user of a specified user interface.
The user interface will be disconnected after the command is executed.
Note that the user of the current user interface cannot be cleared.
Example
# Clear the user of the user interface 1 after logging in to the switch via user interface 0.
<Quidway> free user-interface 1
After the command is executed, user interface 1 will be disconnected. It will not be
connected to the switch until you log in via the user interface 1 for the next time.

1.1.10 header

Syntax
header [ shell | incoming | login ] text
undo header [ shell | incoming | login ]
View
System view
Parameter
login: Login information in case of authentication. It is displayed before the user is
prompted to enter user name and password.
shell: User conversation established header, the information output after user
conversation has been established. If authentication is required, it is prompted after the
user passes authentication.
incoming: Login header, the information output after a Modem user logs in. If
authentication is required, it is prompted after the user passes authentication. In this
case, no shell information is output.
text: Specifies the title text. If you do not choose any keyword in the command, the
system displays the login information by default. The system supports two types of
input modes: one is to input all the text in one line, and altogether 256 characters can
be input; the other is to input all the text in several lines using the <Enter> key, and
altogether 1024 characters, excluding command key word, can be input. The text starts
and ends with the first character. After inputting the end character, press the <Enter>
key to exit the interact process.
Description
Using header command, you can configure to display header when user login. Using
undo header command, you can configure not to display the header.
Huawei Technologies Proprietary
1-8
Chapter 1 Logging in Switch Commands