Command Manual - Auto Detecting
Quidway S3500 Series Ethernet Switches
Chapter 1 Auto Detect Configuration Commands
Note:
Quidway S3552F /S3552G /S3552P /3528G /3528P /S3526E /S3526E FM /S3526E
FS /S3526C Ethernet Switches support the Auto Detecting feature.
1.1.1 detect-group
Syntax
detect-group group-number
undo detect-group group-number
View
System view
Parameter
group-number: Specifies detecting group number, which ranges from 1 to 100.
Description
Use the detect-group command to create a detecting group and enter its view.
Use the undo detect-group command to remove a specified detecting group.
Example
# Create a detecting group numbered 10.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] detect-group 10
[Quidway-detect-group-10]
1.1.2 detect-list
Syntax
detect-list list-number ip address ip-address [ nexthop ip-address ]
undo detect-list list-number ip address ip-address [ nexthop ip-address ]
Chapter 1 Auto Detect Configuration Commands
Huawei Technologies Proprietary
1-1