Huawei quidway s3526 series Getting Started page 26

Command Manual - Getting Started
Quidway S3500 Series Ethernet Switches
service-type { ftp [ ftp-directory directory ] | lan-access | { ssh | telnet }* [ level
level ] }
undo service-type { ftp [ ftp-directory ] | lan-access | { ssh | telnet }* [ level level ] }
For S3526, S3526 FM and S3526 FS:
service-type { ftp [ ftp-directory directory ] | lan-access | telnet [ level level ] }
undo service-type { ftp [ ftp-directory ] | lan-access | telnet [ level level ] }
View
Local-user view
Parameter
telnet: Specifies user type as Telnet.
ssh: Specifies user type as SSH.
level level: Specifies the level of Telnet or SSH users. The argument level is an integer
in the range of 0 to 3 and defaults to 1.
ftp: Specifies user type as ftp.
ftp-directory directory: Specifies the directory of ftp users, directory is a character
string of up to 64 characters.
lan-access: Specifies user type to lan-access, which mainly refers to Ethernet
accessing users, 802.1x supplicants for example.
Description
Using service-type command, you can configure which level of command a user can
use after logon. Using undo service-type command, you can restore the default level
of command a user can use after logon.
Commands are classified into four levels, namely visit level, monitoring level, system
level and management level. They are introduced as follows:
Visit level: Commands of this level involve command of network diagnosis tool
(such as ping and tracert), command of switch between different language
environments of user interface (language-mode), and telnet command etc. The
operation of saving configuration file is not allowed on this level of commands.
Monitoring level: Commands of this level, including the display command and the
debugging command, are used for system maintenance, service fault diagnosis,
etc. The operation of saving the configuration file is not allowed on this level of
commands.
System level: Service configuration commands, including routing command and
commands on each network layer, are used to provide direct network service to
the user.
Management level: These are commands that influence the basic operation of the
system and system support module, which plays a supporting role on service.
Huawei Technologies Proprietary
1-16
Chapter 1 Logging in Switch Commands