Snmp-Agent Mib-View - Huawei quidway s3526 series Getting Started

Command Manual - System Management
Quidway S3500 Series Ethernet Switches
notifyview: Specify the notify view name, ranging from 1 to 32 bytes.
acl acl-list:Set access control list for this group name.
Description
Using snmp-agent group command, you can configure a new SNMP group, that is, to
map SNMP user to SNMP view. Using undo snmp-agent group command, you can
cancel a specified SNMP group.
For the following reasons:
snmp-agent target-host command automatically generates a notifyview for user
and adds it to the corresponding group.
Any change of the SNMP group notify view will affect all the users related to this
group.
Please do not specify the notify view when configuring SNMP group.
Example
# Create an SNMP group named huawei.
[Quidway] snmp-agent group v3 huawei.

5.1.13 snmp-agent mib-view

Syntax
snmp-agent mib-view { included | excluded } view-name oid-tree
undo snmp-agent mib-view view-name
View
System view
Parameter
included: Include this MIB subtree.
excluded: Exclude this MIB subtree.
view-name: Specify the view name, with a character string, ranging from 1 to 32
characters.
oid-tree: MIB object subtree. It can be a character string of the variable OID, or a
variable name, ranging from 1 to 255 characters.
Description
Using snmp-agent mib-view command, you can create or update the view information.
Using undo snmp-agent mib-view command, you can cancel the view information
By default, the view name is v1default. OID is 1.3.6.1.
Huawei Technologies Proprietary
5-10
Chapter 5 SNMP Configuration Commands