Display Ospf Cumulative - Huawei quidway s3526 series Getting Started

Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
Authtype
Routing preference
Default
parameters
SPF
count
Area Count
Nssa Area Count
SPF scheduled
Interface
Cost
State
Type
Priority
Designated Router
Backup
Router
Timers
Transmit Delay

3.1.16 display ospf cumulative

Syntax
display ospf cumulative
View
Any view
Field
Authentication type of OSPF
Routing preference of OSPF. The internal route of OSPF
includes intra/inter area route, and its default routing
preference is 10. While that of the external route of OSPF
is 150 by default
ASE Default ASE parameters of OSPF, including metric, type
and tag
computation
SPF computation count since OSPF is enabled
Areas for connection to this router
Number of NSSA areas
SPF scheduled (flag)
Interface name belonging to this area
Cost of routes
State information
Network type of OSPF interface
Priority
IP address of designated router (DR)
Designated
IP address of backup designated router (BDR)
OSPF timers, defining as follows:
Hello
Dead
Poll
Retransmit
Delay time of transmitting LSA
Huawei Technologies Proprietary
Chapter 3 OSPF Configuration Commands
Description
Interval of hello packet
Interval of dead neighbors
Interval of poll
Interval of retransmitting LSA
3-13