Chapter 6 Rmon Configuration Commands; Display Rmon Alarm - Huawei quidway s3526 series Getting Started

Command Manual - System Management
Quidway S3500 Series Ethernet Switches

Chapter 6 RMON Configuration Commands

6.1 RMON Configuration Commands

6.1.1 display rmon alarm

Syntax
display rmon alarm [ alarm-table-entry ]
View
Any view
Parameter
alarm-table-entry: Alarm table entry index.
Description
Using display rmon alarm command, you can view RMON alarm information.
For the related commands, see rmon alarm.
Example
# Display the RMON alarm information.
<Quidway> display rmon alarm
Alarm table 1 owned by HUAWEI is VALID.
Samples absolute value : 1.3.6.1.2.1.16.1.1.1.4.1 <etherStatsOctets.1>
Sampling interval
Rising threshold
Falling threshold
When startup enables
Latest value
Table 6-1 Output description of the display rmon alarm command
Field
Alarm table 1
HUAWEI
VALID
Samples absolute
value
Sampling interval
: 10(sec)
: 1000(linked with event 1)
: 100(linked with event 1)
: risingOrFallingAlarm
: 0
Index 1 in the alarm table
Owner
The entry corresponding to the index is valid
Sampling the
1.3.6.1.2.1.16.1.1.1.4.1
The interval of sampling the value
Huawei Technologies Proprietary
6-1
Chapter 6 RMON Configuration Commands
Description
absolute value of the node