Snmp-Agent Target-Host - Huawei quidway s3526 series Getting Started

Command Manual - System Management
Quidway S3500 Series Ethernet Switches
Parameter
sysContact: Specify a character string describing the system maintaining contact (in
bytes), with a length ranging from 1 to 255; By default, the contact information is
"HuaWei Beijing China".
sysLocation: Specify a character string to describe the system location; By default, the
character string is "Beijing China".
version: version of running SNMP. By default, the version is SNMP V3.
v1:SNMP V1.
v2c:SNMP V2C.
v3:SNMP V3.
all:all SNMP version (includes SNMP V1, SNMP V2C, SNMP V3).
Description
Using snmp-agent sys-info command, you can configure system information such as
geographical location of the device, contact information for system maintenance and
version information of running SNMP. Using undo snmp-agent sys-info location
command, you can restore the default value.
By default, the contact information is "HuaWei Beijing China", the system location is
"Beijing China", the SNMP version is SNMP V3.
Example
# Set system location as Building 3/Room 214.
[Quidway] snmp-agent sys-info location Building 3/Room 214

5.1.16 snmp-agent target-host

Syntax
snmp-agent target-host trap address udp-domain host-addr [ udp-port
udp-port-number ] params securityname community-string [ v1 | v2c | v3
[ authentication | privacy ] ]
undo snmp-agent target-host host-addr securityname community-string
View
System view
Parameter
trap:Specify the host to receive traps or notifications
address:Specify the transport addresses to be used in the generation of SNMP
messages.
Huawei Technologies Proprietary
5-12
Chapter 5 SNMP Configuration Commands