Command Manual - System Management
Quidway S3500 Series Ethernet Switches
[Quidway-Vlan-Interface1] ntp-service broadcast-server authentication-key 4
version 3
7.1.10 ntp-service in-interface disable
Syntax
ntp-service in-interface disable
undo ntp-service in-interface disable
View
VLAN interface view
Parameter
None
Description
Using ntp-service in-interface disable command, you can disable an interface to
receive NTP message. Using undo ntp-service in-interface disable command, you
can enable an interface to receive NTP message.
By default, an interface is enabled to receive NTP message.
Example
# Disable Vlan-Interface1 to receive NTP message.
[Quidway] interface vlan-interface1
[Quidway-Vlan-Interface1] ntp-service in-interface disable
7.1.11 ntp-service max-dynamic-sessions
Syntax
ntp-service max-dynamic-sessions number
undo ntp-service max-dynamic-sessions
View
System view
Parameter
number: The maximum sessions can be created locally, ranging from 0 to 100.
Huawei Technologies Proprietary
7-8
Chapter 7 NTP Configuration Commands