Command Manual - System Management
Quidway S3500 Series Ethernet Switches
[Quidway-user-huawei1] service-type lan-access
1.4 FTP Client Commands
1.4.1 ascii
Syntax
ascii
View
FTP Client view
Parameter
None
Description
Using ascii command, you can configure data transmission mode as ASCII mode.
By default, the file transmission mode is ASCII mode.
Perform this command if the user needs to change the file transmission mode to default
mode.
Example
# Configure to transmit data in the ASCII mode.
[ftp] ascii
200 Type set to A.
1.4.2 binary
Syntax
binary
View
FTP Client view
Parameter
None
Description
Using binary command, you can configure file transmission type as binary mode.
Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-18