Chapter 8 Ssh Configuration Commands - Huawei quidway s3526 series Getting Started

Command Manual - System Management
Quidway S3500 Series Ethernet Switches

Chapter 8 SSH Configuration Commands

Note:
Quidway
FS/S3526C support SSH.
8.1 SSH Configuration Commands
8.1.1 debugging ssh server
Command
debugging ssh server { all | vty index }
undo debugging ssh server { all | vty index }
View
User view
Parameter
all: All SSH channels
index: Debugged SSH channels. Optional values depend on the VTY number and they
are 0~4.
Description
Using the debugging ssh server command, you can send the negotiation process
defined in SSH1.5 protocol to the information center as debugging information and
debug a single user interface. Using the undo debugging ssh server command, you
can disable debugging function.
By default, debugging function is disabled.
For the related commands, see ssh server authentication-retries, ssh server
rekey-interval, ssh server timeout.
Example
# Print debugging information in running SSH
<Quidway> debugging ssh server vty 0
00:23:20: SSH0: starting SSH control process
S3552F/S3552G/S3552P/3528G/3528P/S3526E/S3526E
Huawei Technologies Proprietary
Chapter 8 SSH Configuration Commands
8-1
FM/S3526E