Display Info-Center - Huawei quidway s3526 series Getting Started

Command Manual - System Management
Quidway S3500 Series Ethernet Switches

4.5.2 display info-center

Syntax
display info-center
View
Any view
Parameter
None
Description
Using display info-center command, you can view the configuration of system log and
the information recorded in the memory buffer.
If the information in the current log/trap buffer is less than the specified sizeval, display
the actual log/trap information.
For the related commands, see info-center enable,info-center loghost,info-center
logbuffer,info-center console channel,info-center monitor channel.
Example
# Show the system log information.
<Quidway> display info-center
Information Center:enabled
Log host:
Console:
Monitor:
SNMP Agent:
Log buffer:
Trap buffer:
Information timestamp setting:
173.168.1.10, channel number:2, channel name:loghost,
language:english , host facility local:7
channel number:0, channel name:console
channel number:1, channel name:monitor
channel number:5, channel name:snmpagent
enabled, max buffer size:1024, current buffer size:256
current messages:6, channel number:4, channel name:logbuffer
dropped messages:0, overwrote messages:0
enabled, max buffer size:1024, current buffer size:256
current messages:0, channel number:3, channel name:trapbuffer
dropped messages:0, overwrote messages:0
Huawei Technologies Proprietary
Chapter 4 System Maintenance Commands
4-20