Display Rmon Eventlog - Huawei quidway s3526 series Getting Started

Command Manual - System Management
Quidway S3500 Series Ethernet Switches
VALID
Description
Will cause log-trap when triggered,
last
00h:02m:27s

6.1.3 display rmon eventlog

Syntax
display rmon eventlog [ event-number ]
View
Any view
Parameter
event-number: Entry index of event table.
Description
Using display rmon eventlog command, you can view RMON event log.
The display includes description about event index in event table, description to the
event, and occurrence time of the latest event (counted on system initiate/boot time in
centisecond).
Example
# Show event log of RMON.
<Quidway> display rmon eventlog 1
Event table 1 owned by HUAWEI is VALID.
Generates eventLog 1.1 at 0days 00h:01m:39s.
Description: The 1.3.6.1.2.1.16.1.1.1.4.1 defined in alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Generates eventLog 1.2 at 0days 00h:02m:27s.
Description: The alarm formula defined in private alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Table 6-3 Output description of the display rmon eventlog command
Event table 1
HUAWEI
Field
triggered at 0days
Field
Huawei Technologies Proprietary
Chapter 6 RMON Configuration Commands
Description
The entry corresponding to the index is valid
Event description
When the event is triggered, it will cause the
log-trap. And the last triggered time is
00h:02m:27s
Description
Index 1 in event table
Owner
6-3