Huawei quidway s3526 series Getting Started page 844

Command Manual - Auto Detecting
Quidway S3500 Series Ethernet Switches
1.1.4 option
Syntax
option [ and | or ]
undo option [ and | or ]
View
Detecting group views
Parameter
and: Specifies the detecting result is reachable only when all the specified interfaces
can be successfully pinged.
or: Specifies the detecting result is reachable if one of the specified interfaces can be
successfully pinged.
Description
Use the option command to specify how the detecting result is generated.
Use the undo option command to specify the detecting result is reachable only when
all the specified interfaces can be successfully pinged, which is the same as the option
and command.
When a detecting operation is being carried out, the switch detects each interface for
their reachability whose IP address is contained in the detecting group one by one from
those with smaller list-number value to those with larger list-number value.
If you specify the and keyword, the switch returns unreachable as the detecting
result when the switch fails to ping an IP address contained in the detecting group
and stops detecting.
If you specify the or keyword, the switch returns reachable as the detecting result
if the switch succeeds in pinging an IP address contained in the detecting group
and stops detecting.
By default, the and keyword is specified.
Example
# Specify the or keyword for detecting group 10.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] detect-group 10
[Quidway-detect-group-10] option or
Chapter 1 Auto Detect Configuration Commands
Huawei Technologies Proprietary
1-4