Peer Connect-Interface - Huawei quidway s3526 series Getting Started

Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
acl-number: Specify the filter list number of an AS regular expression. The range is 1 to
199.
import: For the received routes.
export: For the advertised routes.
Description
Using peer as-path-acl command, you can configure BGP route filtering Policy based
on AS path list. Using undo peer as-path-acl command, you can cancel the existing
configuration.
By default, the peer/peer group has no AS path list.
For the related commands, see as-path-acl.
Example
# Set the AS path ACL of the peer group test.
[Quidway-bgp] peer test as-path-acl 3 export

4.1.36 peer connect-interface

Syntax
peer { group-name | peer-address } connect-interface interface-name
undo peer { group-name | peer-address } connect-interface interface-name
View
BGP view
Parameter
group-name: Specified peer group.
peer-address: IP address of the peer.
interface-name: Interface name.
Description
Using peer connect-interface command, you can specify the source interface of a
route update packet. Using undo peer connect-interface command, you can restore
the best source interface.
By default, BGP uses the best source interface.
Usually, BGP uses the optimal route to update the source interface of the packets.
However, you can set the mode of the interface to Loopback in order to send route
updates even if the interface is not work normally.
Huawei Technologies Proprietary
4-32
Chapter 4 BGP Configuration Commands