Peer Route-Update-Interval - Huawei quidway s3526 series Getting Started

Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
Parameter
group-name: Name of peer group.
peer-address: IP address of the peer.
route-policy-name: The specified Route-policy.
import: Apply to the route policy coming from the peer/peer group.
export: Apply to the route policy advertised to the peer/peer group.
Description
Using peer route-policy command, you can assign the Route-policy to the route
coming from the peer/peer group or the route advertised to the peer/peer group. Using
undo peer route-policy command, you can delete the specified Route-policy.
By default, the peer/peer group has no Route-policy association.
Example
# Apply the Route-policy named test-policy to the route coming from the peer/peer
group test.
[Quidway-bgp] peer test route-policy test-policy export

4.1.49 peer route-update-interval

Syntax
peer { group-name | peer-address } route-update-interval seconds
undo peer { group-name | peer-address } route-update-interval
View
BGP view
Parameter
group-name: Specify the name of the configured peer group.
peer-address: Specify the IP address of the peer.
seconds: The minimum interval of sending BGP update packets route. The range is 0 to
600. By default, the advertisement interval is: 5 seconds for internal peer/peer group,
and 30 seconds for external peer/peer group.
Description
Using peer route-update-interval command, you can configure the interval for the
transmission route of a peer/peer group. Using undo peer route-update-interval
command, you can restore the interval to the default value.
Huawei Technologies Proprietary
4-41
Chapter 4 BGP Configuration Commands