Dot1X Retry-Version-Max - Huawei quidway s3526 series Getting Started

Command Manual - Security
Quidway S3500 Series Ethernet Switches
value is 3, that is, the switch can retransmit the authentication request frame to the
supplicant for 3 times.
Description
Using dot1x retry command, you can configure the maximum times an Ethernet switch
can retransmit the authentication request frame to the supplicant. Using undo dot1x
retry command, you can restore the default maximum retransmission time.
After the switch has transmitted authentication request frame to the user for the first
time, if no user response is received during the specified time-range, the switch will
re-transmit authentication request to the user. This command is used for specifying
how many times the switch can re-transmit the authentication request frame to the
supplicant. When the time is 1, the switch is configured to transmit authentication
request frame only once. 2 indicates that the switch is configured to transmit
authentication request frame once again when no response is received for the first time
and so on. This command has effect on all the port after configuration.
For the related commands, see display dot1x.
Example
# Configure the current device to transmit authentication request frame to the user for
no more than 9 times.
[Quidway] dot1x retry 9

1.1.12 dot1x retry-version-max

Syntax
dot1x retry-version-max max-retry-version-value
undo dot1x retry-version-max
View
System view
Parameter
max-retry-version-value: The maximum retry times for a device to send the version
request frame to an access user. The value ranges form 1 to 10, and defaults to 3.
Description
Using the dot1x retry-version-max command, you can set the maximum retry times
for an Ethernet switch to send version request frame to an access user. Using the undo
dot1x retry-version-max command, you can return the value to the defaults.
After sending client version request frame for the first time, if the switch receives no
response from the client response within a certain period of time (set by the version
Huawei Technologies Proprietary
1-12
Chapter 1 802.1x Configuration Commands