Command Manual - Network Protocol
Quidway S3500 Series Ethernet Switches
Parameter
None
Description
Using the ip address dhcp-alloc command, you can configure VLAN interface to
obtain IP address using DHCP. Using the undo ip address dhcp-alloc command, you
can remove the configuration.
By default, the VLAN interface doest not obtain IP address using DHCP.
Example
# Configure VLAN interface to obtain IP address using DHCP.
[Quidway-Vlan-interface1] ip address dhcp-alloc
Chapter 4 DHCP Client Configuration Commands
Huawei Technologies Proprietary
4-3