Huawei quidway s3526 series Getting Started page 527

Command Manual - Integrated Management
Quidway S3500 Series Ethernet Switches
Interface: Ethernet0/19
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: Ethernet0/20
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: Ethernet0/21
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: Ethernet0/22
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: Ethernet0/23
Status: Enabled, Pkts Snd: 11, Pkts Rvd: 12, Pkts Err: 0
Neighbor 1:
MAC Address : 00e0-fc00-0003
Port Name
Software Ver: VRP3.10
Device Name : Quidway S3526
Port Duplex : AUTO
Product Ver : 3526-0001C
Interface: Ethernet0/24
Status: Enabled, Pkts Snd: 0, Pkts Rvd: 0, Pkts Err: 0
Interface: GigabitEthernet2/1
Status: Enabled, Pkts Snd: 4, Pkts Rvd: 5, Pkts Err: 0
Table 2-1 Information about NDP configuration the NDP neighbors discovered by a
port
Neighbor
Protocol is enabled
Neighbor
Protocol Ver: 1
Hello Timer: 60(s)
Aging Timer: 180(s)
Interface: Ethernet0/1
Status: Enabled
Aging Time: 170(s)
: Ethernet0/23
Field
Discovery
The system NDP is enabled on the switch
Discovery
The NDP version
The current device transmits NDP packet every 60
seconds.
A neighbor keeps the NDP information of the current
device for 180 seconds.
Port number, specify a port
NDP is enabled on the port
Huawei Technologies Proprietary
Chapter 2 HGMP V2 Configuration Commands
Description
2-3