Chapter 6 Route Capacity Configuration Commands; Display Memory - Huawei quidway s3526 series Getting Started

Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
Chapter 6 Route Capacity Configuration
6.1 Route Capacity Configuration Commands

6.1.1 display memory

Syntax
display memory
Mode
Any view
Parameter
None
Description
Using display memory command, you can view the memory setting.
Example
# Display the current memory setting.
<Quidway> display memory
System Total Memory(bytes): 34189056
Total Used Memory(bytes): 18692804
Used Rate: 54%
The displayed information is described specifically in the following table:
Table 6-1 The description for the information displayed by the display memory
command
Item
System
Memory(bytes)
Total
Memory(bytes)
Used Rate
Commands
Total
The total number of the Ethernet switch memory in byte.
Used
The total number of the used Ethernet switch memory in byte.
The used rate of the Ethernet switch memory
Huawei Technologies Proprietary
6-1

Chapter 6 Route Capacity Configuration Commands

Description