Port Hybrid Vlan - Huawei quidway s3526 series Getting Started

Command Manual - Port
Quidway S3500 Series Ethernet Switches
Description
Using port hybrid pvid vlan command, you can configure the default VLAN ID of the
hybrid port. Using undo port hybrid pvid command, you can restore the default VLAN
ID of the hybrid port.
Hybrid port can be configured together with the isolate-user-vlan. But if the default
VLAN has set mapping in the isolate-user-vlan, the default VLAN ID cannot be modified.
If you want to modify it, cancel the mapping first.
The default VLAN ID of local hybrid port shall be consistent with that of the peer one,
otherwise, the packet cannot be properly transmitted.
For the related command, see port link-type.
Example
# Configure the default VLAN of the hybrid port Ethernet0/1 to 100.
[Quidway-Ethernet0/1] port hybrid pvid vlan 100

1.1.20 port hybrid vlan

Syntax
port hybrid vlan vlan_id_list { tagged | untagged }
undo port hybrid vlan vlan_id_list
View
Ethernet port view
Parameter
vlan_id_list: vlan_id_list = [ vlan_id1 [ to vlan_id2 ] ]&<1-10> specifies which VLAN the
hybrid port will be added to. It can be discrete. The vlan_id ranges from 1 to 4094.
&<1-10> indicates that the former parameter can be input 10 times repeatedly at most.
tagged: The packet of specified VLAN will have tag.
untagged: The packet of specified VLAN will not have tag.
Description
Using port hybrid vlan command, you can join the hybrid port to specified existing
VLAN. Using undo port hybrid vlan command, you can cancel the hybrid port from
the specified VLAN.
Hybrid port can belong to multiple VLANs. If the port hybrid vlan vlan_id_list { tagged
| untagged } command is used for many times, the VLANs carried by the hybrid port is
the set of vlan_id_list.
Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-16