Display Ftp-User; Ftp Server - Huawei quidway s3526 series Getting Started

Command Manual - System Management
Quidway S3500 Series Ethernet Switches

1.3.2 display ftp-user

Syntax
display ftp-user
View
Any view
Parameter
None
Description
Using display ftp-user command, you can view the parameters of current FTP user.
You can perform this command to examine the configuration after setting FTP
parameters.
Example
# Show the configuration of FTP user parameters.
<Quidway> display ftp-user
% No ftp user

1.3.3 ftp server

Syntax
ftp sever enable
undo ftp sever
View
System view
Parameter
enable: Start FTP Server.
Description
Using ftp server command, you can start FTP Server and enable FTP user logon.
Using undo ftp server command, you can close FTP Server and disable FTP user
logon.
By default, FTP Server is shut down.
Perform this command to easily start or shut down FTP Server, preventing Ethernet
Switch from being attacked by some unknown user.
Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-14