Igmp Group-Policy - Huawei quidway s3526 series Getting Started

Command Manual - Multicast
Quidway S3500 Series Ethernet Switches
Example
# View the IGMP configuration and running information of Ethernet 0/1
[Quidway] display igmp port Ethernet 0/1
Ethernet0/1:
Vlan-interface2:
IGMP groups joined:
224.2.149.17
Table 4-2 Description of information generated by the command display igmp port
Ethernet0/1:
Vlan-interface2:
IGMP groups joined:
224.2.149.17

4.1.5 igmp group-policy

Syntax
igmp group-policy acl-number [ 1 | 2 | port { interface_type interface_ num |
interface_name } [ to { interface_type interface_ num | interface_name } ] ]
undo igmp group-policy [ port { interface_type interface_ num | interface_name } [ to
{ interface_type interface_ num | interface_name } ] ]
View
Interface View
Parameter
acl-number: Number of the basic IP access control list number, defining a multicast
group range. The value ranges from 2000 to 2999.
1: IGMP version 1.
2: IGMP version 2. If IGMP version is not specified, version 2 will be used as default.
port: Packets received and sent by the port(s) and applied to the conditions set by the
ACL will be filtered. And the port(s) must belong to the VLAN interface being configured
by this command.
Description
Using igmp group-policy command, you can set the filter of multicast groups on an
interface to control the accessing to the IP multicast groups. Using undo igmp
group-policy command, you can remove the filter configured.
Field
Port number: Ethernet0/1
The port uses the virtual interface Vlan-interface2
The port with an address 224.2.149.17 reports joining
IGMP group
Huawei Technologies Proprietary
Chapter 4 IGMP Configuration Commands
Description
4-4