Ip Route-Static Default-Preference - Huawei quidway s3526 series Getting Started

Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
Example
# Configure the next hop of the default route as 129.102.0.2.
[Quidway] ip route-static 0.0.0.0 0.0.0.0 129.102.0.2

1.2.2 ip route-static default-preference

Syntax
ip route-static default-preference default-preference-value
undo ip route-static default-preference
View
System view
Parameter
default-preference-value: The default preference value of static routes, which will be
the preference value of the static route if its preference is not specified when configured.
Its default value is 60.
Description
Using ip route-static default-preference command, you can configure the default
preference value of static routes. Using undo ip route-static default-preference
command, you can restore the default value.
A static route's preference will be the default-preference-value set by this command if
its preference is not specified when configured by ip route-static command.
For the related commands, see display ip routing-table, ip route-static.
Example
# Configure the default preference of static routes as 120.
[Quidway] ip route-static default-preference 120
Chapter 1 Static Route Configuration Commands
Huawei Technologies Proprietary
1-17