Dot1X Version-Check - Huawei quidway s3526 series Getting Started

Command Manual - Security
Quidway S3500 Series Ethernet Switches
ver-period-value: Period set by the version request timeout timer, ranging from 1 to 30,
in seconds. By default, the value is 1.
Description
Using dot1x timer command, you can configure the 802.1x timers. Using undo dot1x
timer command, you can restore the default values.
When it is run, 802.1x enables many timers to control the rational and orderly
interacting of the Supplicant, the Authenticator and the Authenticator Server. This
command can set some of the timers (while other timers cannot be set) to adapt the
interaction process. It could be necessary for some special and hard network
environment. Generally, the user should keep the default values of the timers.
For the related commands, see display dot1x.
Example
# Set the Authentication Server timeout timer as 150s.
[Quidway] dot1x timer server-timeout 150

1.1.15 dot1x version-check

Syntax
dot1x version-check [ interface interface-list ]
undo dot1x version-check [ interface interface-list ]
View
System view/Ethernet port view
Parameter
interface interface-list: Ethernet interface list, represents multiple Ethernet interfaces,
in the format of interface-list = { interface-num [ to interface-num ] } & < 1-10 >.
interface-num is a single Ethernet port, in the format of interface-num = { interface-type
interface-num | interface-name }.
Description
Using the dot1x version-check command, you can enable the 802.1x client version
authentication feature on a specific port. Using the undo dot1x version-check
command, you can disable the feature on a specific port.
By default, 802.1x client version authentication feature is disabled on all ports.
In system view, if the interface-list parameter is not specified, it means that to enable
the 802.1x client version authentication feature on all interfaces; if the interface-list
parameter is specified, it means that to enable the feature on the specified interfaces. In
Huawei Technologies Proprietary
1-16
Chapter 1 802.1x Configuration Commands