Huawei quidway s3526 series Getting Started page 812

Command Manual - System Management
Quidway S3500 Series Ethernet Switches
Parameter
None
Description
Using command display ntp-service status, you can display the NTP service status.
Example
<Quidway> display ntp-service status
clock status: unsynchronized
clock stratum: 16
reference clock ID: None
nominal frequency: 100.0000 Hz
actual frequency: 100.0000 Hz
clock precision: 2^17
clock offset: 0.0000 ms
root delay: 0.00 ms
root dispersion: 0.00 ms
peer dispersion: 0.00 ms
reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000)
The following table describes the outputs:
Table 7-1 NTP service status information
Output
clock
unsynchronized
clock stratum: 16
reference clock ID
nominal frequency
actual frequency
clock precision
clock offset
root delay
root dispersion
peer dispersion
reference time
status: Local clock status: do not synchronize to any remote NTP
server.
Indicates the NTP stratum of local clock.
Indicates the address of a remote server of the reference ID, in
the case that the local system has been synchronized by a
remote NTP server or the ID of some clock source.
Nominal frequency of the local system hardware clock
Actual frequency of the local system hardware clock.
Precision of local system clock
Offset of the local clock to the NTP server clock
Root delay from local equipment to the master reference clock.
Dispersion of the local clock relative to the NTP server clock
Dispersion of the remote NTP server.
Reference timestamp
Huawei Technologies Proprietary
7-3
Chapter 7 NTP Configuration Commands
Meaning