Command Manual - Port
Quidway S3500 Series Ethernet Switches
After 802.1X is enabled, the port information cannot be reset.
Example
# Reset statistical information on Ethernet port Ethernet0/1.
<Quidway> reset counters interface ethernet0/1
1.1.25 shutdown
Syntax
shutdown
undo shutdown
View
Ethernet port view
Parameter
None
Description
Using shutdown command, you can disable the Ethernet port. Using undo shutdown
command, you can enable the Ethernet port.
By default, the Ethernet port is enabled.
Example
# Enable Ethernet port Ethernet0/1.
[Quidway-Ethernet0/1] undo shutdown
1.1.26 speed
Syntax
For 100M Ethernet port, this command is in the following format:
speed { 10 | 100 | auto }
For 1000M Ethernet port, this command is in the following format:
speed { 10 | 100 | 1000 | auto }
The undo form of this command is:
undo speed
View
Ethernet port view
Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-20