Display Garp Timer; Garp Timer - Huawei quidway s3526 series Getting Started

Command Manual - VLAN
Quidway S3500 Series Ethernet Switches

3.1.2 display garp timer

Syntax
display garp timer [ interface interface_list ]
View
Any view
Parameter
interface_list: List of Ethernet port to be displayed, expressed as interface _list =
{ { interface_type interface_num | interface_name } [ to { interface_type interface_num
| interface_name } ] }&<1-10>.
interface number and interface_name is interface name. For their meanings and value
range, read command parameters description of "Port" in this document.
&<1-10>: Representing the repeatable times of parameters, 1 is the minimal and 10 is
the maximal.
Description
Using display garp timer command, you can view the value of GARP timer, including
Hold timer, Join timer, Leave timer and LeaveAll timer.
For the related command, see garp timer, garp timer leaveall.
Example
# Show GARP timer on Ethernet0/1.
<Quidway> display garp timer interface ethernet0/1
GARP timers on port Ethernet0/1

3.1.3 garp timer

Syntax
garp timer { hold | join | leave } timer_value
undo garp timer { hold | join | leave }
View
Ethernet port view
Chapter 3 GARP/GVRP Configuration Commands
interface_type is interface type, interface_numis
GARP JoinTime
GARP Leave Time
GARP LeaveAll Time
GARP Hold Time
Huawei Technologies Proprietary
3-2
: 20 centiseconds
: 60 centiseconds
: 1000 centiseconds
: 10 centiseconds