Huawei quidway s3526 series Getting Started page 200

Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
Example
# Display the summary of active routes that are filtered through basic acl 2000.
[Quidway] acl number 2000
[Quidway-acl-basic-2000] rule permit source 10.1.1.1 0.0.0.255
[Quidway-acl-basic-2000] rule deny source any
[Quidway-acl-basic-2000] display ip routing-table acl 2000
Routes matched by access-list 2000:
Summary count: 4
Destination/Mask
10.1.1.0/24
10.1.1.2/32
For detailed description of the output information, see Table 1-1.
# Display the verbose information of the active and inactive routes that are filtered
through basic acl 2000.
<Quidway> display ip routing-table acl 2000 verbose
Routes matched by access-list 2000:
Generate Default: no
+ = Active Route, - = Last Active, # = Both
Summary count: 2
**Destination: 10.1.1.0
**Destination: 10.1.1.2
Table 1-2 Description of information generated by the command display ip
routing-table acl verbose
Field
Destination
Mask
Protocol Pre
DIRECT
DIRECT
Protocol: #DIRECT
*NextHop: 10.1.1.2
Vlinkindex: 0
State: <Int ActiveU Retain Unicast>
Age: 7:24 Cost: 0/0
Protocol: #DIRECT
*NextHop: 127.0.0.1
Vlinkindex: 0
State: <NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 7:24 Cost: 0/0
Destination address
Mask
Huawei Technologies Proprietary
Chapter 1 Static Route Configuration Commands
Cost Nexthop
0 0 10.1.1.2
0 0 127.0.0.1
Mask: 255.255.255.0
Preference: 0
Interface: 10.1.1.2(Vlan-interface1)
Mask: 255.255.255.255
Preference: 0
Interface: 127.0.0.1(InLoopBack0)
Description
1-3
Interface
Vlan-interface1
InLoopBack0
* = Next hop in use