Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
[Quidway] interface Vlan-interface 1
[Quidway-Vlan-interface1] ospf cost 33
3.1.34 ospf dr-priority
Syntax
ospf dr-priority value
undo ospf dr-priority
View
Interface view
Parameter
value: Interface priority for electing the "designated router", ranging from 0 to 255. The
default value is 1.
Description
Using ospf dr-priority command, you can configure the priority for electing the
"designated router" on an interface. Using undo ospf dr-priority command, you can
restore the default value.
The priority of the interface determines the qualification of the interface when the
"designated router" is elected. The interface with higher priority will be considered first
when the vote collision occurs.
Example
# Set the priority of the interface Vlan-interface 1 to 8, when electing the DR.
[Quidway] interface Vlan-interface 1
[Quidway-Vlan-interface1] ospf dr-priority 8
3.1.35 ospf mtu-enable
Syntax
ospf mtu-enable
undo ospf mtu-enable
View
Interface view
Parameter
None.
Huawei Technologies Proprietary
3-35
Chapter 3 OSPF Configuration Commands