Huawei quidway s3526 series Getting Started page 562

Command Manual - STP
Quidway S3500 Series Ethernet Switches
CIST port parameter: Port state, role, priority, path cost, designated bridge,
designated port, edge port/non-edge port, whether connected to the point-to-point
link, port transit limit, whether to enable Root protection, whether being a region
edge port, Hello Time, Max Age, Forward Delay, Message-age time, and
Remaining-hops;
Global MSTIs parameter: MSTI instance ID, bridge priority of the instance, region
root, internal path cost, MSTI root port, and MASTER bridge;
MSTIs port parameter: Port state, role, priority, path cost, designated bridge, and
Remaining Hops.
Statistics information: Count of TCN, CONFIG BPDU, RST, and MST BPDU
transmitted/received via the port.
For the related command, see reset stp.
Example
# Display the state and statistics information about the spanning tree.
<Quidway> display stp instance 0 interface ethernet0/1 to ethernet0/10 brief
MSTID
0
0
0
0
0
0
0
0
0
0
The above information indicates that the MSTIDs of the ethernet0/1 through
ethernet0/10 are all 0, that is, all these ports belong to CIST.
Table 1-2 the display Information
MSTID
Port
STP State
Guard Type
Port
Ethernet0/1
Ethernet0/2
Ethernet0/3
Ethernet0/4
Ethernet0/5
Ethernet0/6
Ethernet0/7
Ethernet0/8
Ethernet0/9
Ethernet0/10
Field
MST instance ID of the port
Port number
STP State of the port, which can be up or down.
Guard Type of the port, which can be
Huawei Technologies Proprietary
Chapter 1 MSTP Configuration Commands
STP State Guard Type
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
Description
1-4
none
none
none
none
none
none
none
none
none
none