Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
3.1.48 spf-schedule-interval
Syntax
spf-schedule-interval interval
undo spf-schedule-interval
View
OSPF view
Parameter
interval: SPF calculation interval of OSPF, which is in second in the range of 1 to 10.
The default value is 5 seconds.
Description
Using spf-schedule-interval command, you can configure the route calculation
interval of OSPF. Using undo spf-schedule-interval command, you can restore the
default setting.
According to the Link State Database (LSDB), the router running OSPF can calculate
the shortest path tree taking itself as the root and determine the next hop to the
destination network according to the shortest path tree. By adjusting SPF calculation
interval, network frequently changing can be restrained, which may lead to that too
many bandwidth resources and router resources will be used.
Example
# Set the OSPF route calculation interval of Quidway to 6 seconds.
[Quidway-ospf] spf-schedule-interval 6
3.1.49 stub
Syntax
stub [ no-summary ]
undo stub
View
OSPF Area view
Parameter
no-summary: ABR is disabled to transmit Summary LSAs to the STUB area.
Huawei Technologies Proprietary
3-46
Chapter 3 OSPF Configuration Commands