Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
Note:
The modified router ID will not be valid unless OSPF is re-enabled.
For the related commands, see ospf.
Example
# Set the router ID to 10.1.1.3.
[Quidway] router id 10.1.1.3
3.1.46 silent-interface
Syntax
silent-interface silent-interface-type silent-interface-number
undo silent-interface silent-interface-type silent-interface-number
View
OSPF view
Parameter
silent-interface-type: Specify the interface type
silent-interface-number: Specify the interface number.
Description
Using silent-interface command, you can disable an interface to transmit OSPF
packet. Using undo silent-interface command, you can restore the default setting.
By default, the interface is enabled to transmit OSPF packet.
You can use this command to disable an interface to transmit OSPF packet, so as to
prevent the router on some network from receiving the OSPF routing information. On a
switch, this command can disable/enable the specified VLAN interface to send OSPF
packets
Example
# Disable interface Vlan-interface 2 to transmit OSPF packet.
[Quidway-ospf] silent-interface Vlan-interface 2
Huawei Technologies Proprietary
3-44
Chapter 3 OSPF Configuration Commands