Tftp Configuration Commands; Tftp; Tftp Get - Huawei quidway s3526 series Getting Started

Command Manual - System Management
Quidway S3500 Series Ethernet Switches
By default, verbose is enabled.
Example
# Enable verbose.
[ftp]verbose

1.5 TFTP Configuration Commands

1.5.1 tftp

Syntax
tftp { ascii | binary }
View
System view
Parameter
ascii: Text format.
binary: Binary format; By default, the transmission mode is binary.
Description
Using tftp command, you can configure the transmission mode of the TFTP files.
TFTP transmits files in two modes, binary mode for program files and ASCII mode for
text files. You can perform this command to configure the file transmission mode. By
default, TFTP transmits files in binary mode. Before resetting the mode and restarting
the switch, the set mode will not change.
For the related commands, see tftp get, tftp put.
Example
# Transmit the files in text format.
[Quidway] tftp ascii

1.5.2 tftp get

Syntax
tftp get //A.A.A.A/xxx.yyy mmm.nnn
View
System view
Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-30