Display Debugging; Display Saved-Configuration - Huawei quidway s3526 series Getting Started

Command Manual - System Management
Quidway S3500 Series Ethernet Switches
#
local-server nas-ip 127.0.0.1 key nec
#
vlan 1
#
user-interface aux 0
user-interface vty 0 4
#
return

4.2.3 display debugging

Syntax
display debugging [ interface { interface-name | interface-type interface-num } ]
[ module-name ]
View
Any view
Parameter
interface-name: Specify the Ethernet port name.
interface-type: Specify the Ethernet port type.
interface-num: Specify the Ethernet port number.
module-name: Specify the module name.
Description
Using display debugging command, you can view the enabled debugging process.
Show all the enabled debugging when there is no parameter.
For the related commands, see debugging.
Example
# Show all the enabled debugging.
<Quidway> display debugging
IP packet debugging switch is on.

4.2.4 display saved-configuration

Syntax
display saved-configuration
Huawei Technologies Proprietary
4-9
Chapter 4 System Maintenance Commands