Huawei quidway s3526 series Getting Started page 211

Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
Description
Using display ip routing-table verbose command, you can view the verbose routing
table information.
With the verbose parameter, this command displays the verbose routing table
information. The descriptor describing the route state will be displayed first, then the
statistics of the entire routing table will be output and finally the verbose description of
each route will be output.
All current routes, including inactive route and invalid route, can be displayed using
display ip routing-table verbose command.
Example
# Display the verbose routing table information.
<Quidway> display ip routing-table verbose
Routing Tables:
Generate Default: no
+ = Active Route, - = Last Active, # = Both
Destinations: 4
Holddown: 0
**Destination: 10.153.25.0
**Destination: 10.153.25.200
**Destination: 127.0.0.0
**Destination: 127.0.0.1
Routes: 4
Delete: 0
Protocol: #DIRECT
*NextHop: 10.153.25.200
State: <Int ActiveU Retain Unicast>
Age: 33:42 Cost: 0/0
Protocol: #DIRECT
*NextHop: 127.0.0.1
State: <NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 33:42 Cost: 0/0
Protocol: #DIRECT
*NextHop: 127.0.0.1
State: <NoAdvise Int ActiveU Retain Unicast>
Protocol: #DIRECT
*NextHop: 127.0.0.1
State: <NotInstall NoAdvise Int ActiveU Retain Gateway Unicast>
Huawei Technologies Proprietary
Chapter 1 Static Route Configuration Commands
* = Next hop in use
Hidden: 0
Mask: 255.255.255.0
Preference: 0
Interface: 10.153.25.200(Vlan-interface1)
Mask: 255.255.255.255
Preference: 0
Interface: 127.0.0.1(InLoopBack0)
Mask: 255.0.0.0
Preference: 0
Interface: 127.0.0.1(InLoopBack0)
Mask: 255.255.255.255
Preference: 0
Interface: 127.0.0.1(InLoopBack0)
1-14