Igmp-Snooping Fast-Leave - Huawei quidway s3526 series Getting Started

Command Manual - Multicast
Quidway S3500 Series Ethernet Switches
undo igmp-snooping
View
System view
Parameter
enable: Enable IGMP Snooping.
disable: Disables IGMP Snooping; By default, the switch disables IGMP Snooping
feature.
Description
Using igmp-snooping command, you can enable/disable IGMP Snooping. Using
undo igmp-snooping command, you can restore the default setting.
This command is used to enable or disable IGMP Snooping on the switch.
Example
# Enable IGMP Snooping.
[Quidway] igmp-snooping enable

2.1.5 igmp-snooping fast-leave

Syntax
igmp-snooping fast-leave
undo igmp-snooping fast-leave
View
Ethernet port view
Parameter
None
Description
Using the igmp-snooping fast-leave command, you can enable the function of fast
removing a port from a multicast group. Using the undo igmp-snooping fast-leave
command, you can cancel this configuration.
By default, the fast remove function is disabled.
Normally, at the receiving of the IGMP Leave packet, igmp-snooping sends out
group-specific query packet instead of directly removing a port from a multicast group.
After waiting for a period of time, if it receives no respond, igmp-snooping then
removes the port form the group. By configuring this command, igmp-snooping
Chapter 2 IGMP Snooping Configuration Commands
Huawei Technologies Proprietary
2-4