Display Device - Huawei quidway s3526 series Getting Started

Command Manual - System Management
Quidway S3500 Series Ethernet Switches
19% in last 1 minute
19% in last 5 minutes
Table 3-1 Display information
CPU busy status.
18% in last 5 seconds
19% in last 1 minute
19% in last 5 minutes

3.1.5 display device

Syntax
display device
View
Any view
Parameter
None
Description
Using display device command, you can view module type and working status
information of each card (including main card and daughter-card).
Perform display device command to display the module type and working status
information of a card, including physical card number, physical daughter card number,
number of ports, hardware version number, FPGA version number, BOOTROM
software version number, application version number, address learning mode, interface
card type and interface card type description, etc.
Example
# Show the card information.
<Quidway> display device
SlotNo SubSNo PortNum PCBVer
0 0
The following table describes the displaying information.
Field
The busy status of switch
The CPU occupancy rate is 18% at last 5 seconds
The CPU occupancy rate is 19% at last 1 minute
The CPU occupancy rate is 19% at last 5 minutes
24 REV.0
Huawei Technologies Proprietary
Chapter 3 Device Management Commands
Description
FPGAVer CPLDVer BootRomVer
001 002 360
3-3
AddrLM Type
IVL MAIN